Current issue


2025-09
Volume 11, issue 03
<< prev. next >>
ISSN: 2274-0422

Article Management

You must log in to submit or manage articles.

You do not have an account yet ? Sign up.

Most downloaded articles (last 90 days)


Page 4 of 10, showing 20 record(s) out of 195 total

3D models related to the publication: A new primate community from the earliest Oligocene of the Atlantic margin of Northwest Africa: Systematic, paleobiogeographic and paleoenvironmental implications
Laurent Marivaux Logo, Anne-Lise Charruault Logo and Mouloud Benammi Logo
Published online: 20/06/2024

Keywords: Africa; Anthropoidea; Atlantic Sahara; Eocene/Oligocene transition; Strepsirrhini

https://doi.org/10.18563/journal.m3.208

  Abstract

    This contribution contains the three-dimensional digital models of the dental fossil material of anthropoid and strepsirrhine primates, discovered in Lower Oligocene detrital deposits outcropping in the Porto Rico and El Argoub areas, east of the Dakhla peninsula region (Atlantic Sahara; in the south of Morocco, near the northern border of Mauritania). These fossils were described, figured and discussed in the following publication: Marivaux et al. (2024), A new primate community from the earliest Oligocene of the Atlantic margin of Northwest Africa: Systematic, paleobiogeographic and paleoenvironmental implications. Journal of Human Evolution. https://doi.org/10.1016/j.jhevol.2024.103548 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 10, issue 02 (2024)

PDF
3D models related to the publication: Comparative anatomy of the bony labyrinth of the bats Platalina genovensium (Phyllostomidae, Lonchophyllinae) and Tomopeas ravus (Molossidae, Tomopeatinae)
Paul M. Velazco Logo and Camille Grohé Logo
Published online: 09/04/2018

Keywords: bony labyrinth; Chiroptera; cochlea

https://doi.org/10.18563/m3.3.4.e2

  Abstract

    The present 3D Dataset contains the 3D models analyzed in Velazco P. M., Grohé C. 2017. Comparative anatomy of the bony labyrinth of the bats Platalina genovensium (Phyllostomidae, Lonchophyllinae) and Tomopeas ravus (Molossidae, Tomopeatinae). Biotempo 14(2). 

  Specimens
 
  M3 article infos

Published in Volume 03, Issue 04 (2017)

PDF
3D models related to the publication: Morphology of the human embryonic brain and ventricles
Naoki Shiraishi Logo, Airi Katayama, Takashi Nakashima, Naoto Shiraki, Shigehito Yamada Logo, Chigako Uwabe, Katsumi Kose Logo and Tetsuya Takakuwa Logo
Published online: 27/07/2015

Keywords: human brain; human embryo; magnetic resonance imaging; three-dimensional reconstruction

https://doi.org/10.18563/m3.1.3.e3

  Abstract

    This contribution contains the 3D models described and figured in the following publication: Shiraishi N et al. Morphology and morphometry of the human embryonic brain: A three-dimensional analysis NeuroImage 115, 2015, 96-103, DOI: 10.1016/j.neuroimage.2015.04.044.

      

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 01, Issue 03 (2015)

PDF
3D surface model related to the publication: An Unusual new species of Burmesescorpiops Lourenco 2016 from Cretaceous Burmese amber (Scorpiones: Palaeoeuscorpiidae: Archaeoscorpiopinae)
Zaw Dan Logo, Ko Zawgyi and Wilson Lourenço Logo
Published online: 03/11/2025

Keywords: Amber; Burmite; Cretaceous; Paleoarachnology; Scorpion

https://doi.org/10.18563/journal.m3.285

  Abstract

    In this contribution a third new species of the rare genus Burmesescorpiops Lourenço, 2016 is described. The discovery of this new element belonging to the family Palaeoeuscorpiidae Lourenço, 2003 and to the subfamily Archaeoscorpiopinae Lourenço, 2015 brings further elements to support the validity of the genus Burmesescorpiops. This generic group remains however, poorly speciose. This is the latest discovery of Burmesescorpiops wunpawng, the name is derived from the Kachin Hilltribe peoples who are indigenous to the area. The data provided here is a 3D surface. 

  Specimens
 
  See original publication
  M3 article infos

Article state: in_press

PDF
3D models related to the publication: Miocene Moschidae (Mammalia, Ruminantia) from the Linxia Basin (China) connect Europe and Asia and show early evolutionary diversity of a today monogeneric family
Bastien Mennecart Logo, Shi-Qi Wang, Jie Cheng, Luda Xing, Jiao Fu Logo and Manuela Aiglstorfer Logo
Published online: 21/04/2023

Keywords: dispersal; Hispanomeryx; Micromeryx; origin; saber tooth; Systematics

https://doi.org/10.18563/journal.m3.184

  Abstract

    The present 3D Dataset contains 3D models of the holotypes described in Aiglstorfer et al.  (2023a). Miocene Moschidae (Mammalia, Ruminantia) from the Linxia Basin (China) connect Europe and Asia and show early evolutionary diversity of a today monogeneric family. Palaeogeography, Palaeoclimatology, Palaeoecology. 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 09, issue 02 (2023)

PDF
3D models related to the publication: Evidence for high-performance suction feeding in the Pennsylvanian stem-group holocephalan Iniopera.
Richard Dearden Logo, Anthony Herrel Logo and Alan Pradel Logo
Published online: 18/01/2023

Keywords: chondrichthyan; holocephalan; iniopterygian; Pennsylvanian; suction feeding

https://doi.org/10.18563/journal.m3.177

  Abstract

    The present 3D Dataset contains 3D models of the cranial, visceral, and pectoral endoskeleton of Iniopera, an iniopterygian stem-group holocephalan from the Pennsylvanian of the USA. These data formed the basis for the analyses carried out in Dearden et al. (2023) “Evidence for high-performance suction feeding in the Pennsylvanian stem-group holocephalan Iniopera” PNAS. 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 09, issue 01 (2023)

PDF
3D models of fossils of Dinomyidae rodents (Rodentia: Caviomorpha) from the Miocene and Quaternary of Brazil
Leonardo Kerber Logo, David Dias da Silva Logo and Francisco R. Negri Logo
Published online: 18/07/2019

Keywords: Micro CT-SCan; Morphology; Potamarchinae; Serra da Capivara; Solimões Formation

https://doi.org/10.18563/journal.m3.95

  Abstract

    This contribution contains 3D models of extinct rodents Dinomyidae from Miocene and Quaternary of Brazil. The Miocene specimens that were digitalized include the holotypes of Potamarchus adamiae, Pseudopotamarchus villanuevai, and Ferigolomys pacarana collected in the Solimões Formation (Upper Miocene), northern Brazil. The Quaternary specimens are the holotype and paratype of Niedemys piauiensis, found in Upper Pleistocene deposits from northeast Brazil. 

  Specimens
 
  M3 article infos

Published in Volume 05, issue 03 (2019)

PDF
3D model related to the publication: Anatomy of the holotype of “Probelesodon kitchingi revisited, a chiniquodontid cynodont (Synapsida, Probainognathia) from the early Late Triassic of southern Brazil
Carolina Hoffmann Logo, Agustín Martinelli Logo and Marco Brandalise de Andrade Logo
Published online: 23/05/2023

Keywords: Computed Tomography; Cynodontia; Morphology; Triassic

https://doi.org/10.18563/journal.m3.194

  Abstract

    The present 3D Dataset contains the 3D model analyzed in the following publication: Carolina A. Hoffmann, A. G. Martinelli & M. B. Andrade. 2023. Anatomy of the holotype of “Probelesodon” kitchingi revisited, a chiniquodontid cynodont (Synapsida, Probainognathia) from the early Late Triassic of southern Brazil, Journal of Paleontology 

  Specimens
 
  M3 article infos

Published in Volume 09, issue 02 (2023)

PDF
3D models related to the publication: Late middle Miocene caviomorph rodents from Tarapoto, Peruvian Amazonia.
Myriam Boivin Logo, Laurent Marivaux Logo, Rodolfo Salas-Gismondi Logo and Pierre-Olivier Antoine Logo
Published online: 08/03/2023

Keywords: Caviomorpha; Laventan; Paleobiogeography; Peru; Systematics

https://doi.org/10.18563/journal.m3.189

  Abstract

    This contribution contains the three-dimensional digital models of a part of the dental fossil material (the large specimens) of caviomorph rodents, discovered in late middle Miocene detrital deposits of the TAR-31 locality in Peruvian Amazonia (San Martín, Peru). These fossils were described, figured and discussed in the following publication: Boivin, Marivaux et al. (2021), Late middle Miocene caviomorph rodents from Tarapoto, Peruvian Amazonia. PLoS ONE 16(11): e0258455. https://doi.org/10.1371/journal.pone.0258455
      

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 09, issue 01 (2023)

PDF
3D models related to the publication: Deciphering the morphological variation and its ontogenetic dynamics in the Late Devonian conodont Icriodus alternatus
Catherine Girard, Anne-Lise Charruault Logo, Thomas Gluck, Carlo Corradini Logo and Sabrina Renaud Logo
Published online: 08/02/2022

Keywords: Conodonts; geometric morphometrics; Late Devonian; ontogenetic trajectory

https://doi.org/10.18563/journal.m3.161

  Abstract

    This contribution contains the 3D models of a set of Famennian conodont elements belonging to the species Icriodus alternatus analyzed in the following publication: Girard et al. 2022: Deciphering the morphological variation and its ontogenetic dynamics in the Late Devonian conodont Icriodus alternatus

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 08, issue 01 (2022)

PDF
3D models related to the publication: 3D Finite Element Analysis and Geometric Morphometrics of Sloths (Xenarthra, Folivora) Mandibles Show Insights on the Dietary Specializations of Fossil Taxa
Luciano Varela Logo and Pablo S. Tambusso Logo
Published online: 10/06/2023

Keywords: Ground Sloths; Mandibles; Photogrammetry; Quaternary; South America

https://doi.org/10.18563/journal.m3.199

  Abstract

    The present 3D Dataset contains the 3D models analyzed in 3D Finite Element Analysis and Geometric Morphometrics of Sloths (Xenarthra, Folivora) Mandibles Show Insights on the Dietary Specializations of Fossil Taxa. Journal of South American Earth Sciences. https://doi.org/10.1016/j.jsames.2023.104445 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 09, issue 02 (2023)

PDF
3D models related to the publication: Exon capture museomics deciphers the nine-banded armadillo species complex and identifies a new species endemic to the Guiana Shield.
Mathilde Barthe Logo, Lionel Hautier Logo, Guillaume Billet Logo, Anderson Feijó Logo, Benoit Moison Logo, Benoît de Thoisy Logo, François Catzeflis Logo and Frédéric Delsuc Logo
Published online: 28/06/2024

Keywords: carapace; Dasypus guianensis; holotype; skeleton; Xenarthra

https://doi.org/10.18563/journal.m3.204

  Abstract

    This contribution contains 3D models of the holotype of a new species of long-nosed armadillos, the Guianan long-nosed armadillo (Dasypus guianensis) described in the following publication: Barthe M., Rancilhac L., Arteaga M. C., Feijó A., Tilak M.-K., Justy F., Loughry W. J., McDonough C. M., de Thoisy B., Catzeflis F., Billet G., Hautier L., Nabholz B., and Delsuc F. 2024. Exon capture museomics deciphers the nine-banded armadillo species complex and identifies a new species endemic to the Guiana Shield. Systematic Biology, syae027. https://doi.org/10.1093/sysbio/syae027
      

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 10, issue 02 (2024)

PDF
3D models related to the publication: Gnathovorax cabreirai: a new early dinosaur and the origin and initial radiation of predatory dinosaurs
Cristian Pacheco, Rodrigo T. Müller Logo, Max C. Langer Logo, Flávio A. Pretto Logo, Leonardo Kerber Logo and Sérgio Dias-da-Silva Logo
Published online: 08/11/2019

Keywords: brain; Dinosauria; endocranial morphology; Herrerasauridae; inner ear.

https://doi.org/10.18563/journal.m3.103

  Abstract

    The present 3D Dataset contains the 3D models of the skull, brain and inner ear endocast analyzed in “Gnathovorax cabreirai: a new early dinosaur and the origin and initial radiation of predatory dinosaurs”. 

  Specimens
 
  M3 article infos

Published in Volume 06, issue 01 (2020)

PDF
3D models related to the publication: Hide and seek shark teeth in Random Forests: Machine learning applied to Scyliorhinus canicula
Fidji Berio Logo, Yann Bayle Logo, Sylvie Agret, Daniel Baum Logo, Nicolas Goudemand Logo and Mélanie Debiais-Thibaud Logo
Published online: 24/05/2022

Keywords: geometric morphometrics; machine learning; Scyliorhinus canicula; sharks; tooth morphology

https://doi.org/10.18563/journal.m3.164

  Abstract

    The present dataset contains the 3D models analyzed in Berio, F., Bayle, Y., Baum, D., Goudemand, N., and Debiais-Thibaud, M. 2022. Hide and seek shark teeth in Random Forests: Machine learning applied to Scyliorhinus canicula. It contains the head surfaces of 56 North Atlantic and Mediterranean small-spotted catsharks Scyliorhinus canicula, from which tooth surfaces were further extracted to perform geometric morphometrics and machine learning. 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 08, issue 02 (2022)

PDF
3D surface scan of the type specimen of Molassitherium delemontense Becker and Antoine, 2013: use of a 3D model for research and conservation issues
Olivier Maridet Logo, Gaëtan Rauber, Martine Rochat, Renaud Roch, Jérémy Tissier Logo, Jérémy Anquetin Logo and Damien Becker Logo
Published online: 19/02/2019

Keywords: Conservation; Early Oligocene; Rhinocerotidae; Switzerland

https://doi.org/10.18563/journal.m3.82

  Abstract

    This contribution provides for the first time the 3D model of the type specimen of Molassitherium delemontense (Mammalia, Rhinocerotidae) described in the following publication: Becker et al. (2013), Journal of Systematic Palaeontology, Vol. 11, Issue 8, 947–972, https://doi.org/10.1080/14772019.2012.699007. Conservation issues of the specimen and solutions using 3D model and 3D prints are detailed. 

  Specimens
 
  M3 article infos

Published in Volume 05, issue 02 (2019)

PDF
A surface scan of the "Tübingen Steinkern", Holotype of Proganochelys quenstedtii (Testudinata), with some historical remarks.
Ingmar Werneburg Logo, Christina Kyriakouli Logo and Tomasz Szczygielski Logo
Published online: 08/08/2022

Keywords: Friedrich August Quenstedt; history of science; Holotype; steinkern; surface scan

https://doi.org/10.18563/journal.m3.168

  Abstract

    Turtles are one of the most impressive vertebrates. Much of the body is either hidden in a shell or can be drawn into it. Turtles impress with their individual longevity and their often peaceful disposition. Also, with their resilience, they have survived all extinction events since their emergence in the Late Triassic. Today's diversity of shapes is impressive and ranges from the large and high domed Galapagos turtles to the hamster-sized flat pancake turtles. The holotype of one of the oldest fossil turtles, Proganochelys quenstedtii, is housed in the paleontological collection in Tübingen/Germany. Since its discovery some years before 1873, P. quenstedtii has represented the 'prototype' of the turtle and has had an eventful scientific history. It was found in Neuenhaus (Häfner-Neuhausen in Schönbuch forest), Baden-Württemberg, Germany, and stems from Löwenstein-Formation (Weißer Keupersandstein), Late Triassic. The current catalogue number is GPIT-PV-30000. The specimen is listed in the historical inventory “Tübinger Petrefaktenverzeichnis 1841 bis 1896, [folio 326v.]“, as “[catalogue number: PV]16549, Schildkröte Weiser Keupersandstein Hafnerhausen” [turtle from White Keuper Sandstone]. Another, more recent synonym is “GPIT/RE/9396”. The same specimen was presented as uncatalogued by Gaffney (1990). Here we provide a surface scan of the steinkern for easier access of this famous specimen to the scientific community.
      

  Specimens
 
  M3 article infos

Published in Volume 08, issue 03 (2022)

PDF
3D models related to the publication: Comparative anatomy and phylogenetic contribution of intracranial osseous canals and cavities in armadillos and glyptodonts (Xenarthra, Cingulata)
Kévin Le Verger Logo, Laureano Gonzalez Ruiz and Guillaume Billet Logo
Published online: 07/04/2023

Keywords: alveolar cavities; canals; cingulata; cranial anatomy; evolutionary scenarios.

https://doi.org/10.18563/journal.m3.157

  Abstract

    The present 3D Dataset contains the 3D models analyzed in the following publication: Le Verger K., González Ruiz L.R., Billet G. 2021. Comparative anatomy and phylogenetic contribution of intracranial osseous canals and cavities in armadillos and glyptodonts (Xenarthra, Cingulata). Journal of Anatomy 00: 1-30 p. https://doi.org/10.1111/joa.13512 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 09, issue 02 (2023)

PDF
3D models related to the publication: New middle Eocene proboscidean from Togo illuminates the early evolution of the elephantiform-like dental pattern.
Lionel Hautier Logo, Rodolphe Tabuce Logo, Koffi E. Kassegne, Yawovi Z. Amoudji Logo, Mickaël Mourlam Logo, Maëva J. Orliac Logo, Frédéric Quillévéré Logo, Anne-Lise Charruault Logo, Ampah K. Johnson and Guillaume Guinot Logo
Published online: 17/11/2021

Keywords: Comparative anatomy; Middle Eocene; Molar; Proboscidea; Togo

https://doi.org/10.18563/journal.m3.145

  Abstract

    This contribution contains the 3D models described and figured in the following publication: Hautier L, Tabuce R, Kassegne KE, Amoudji YZ, Mourlam M, Orliac M, Quillévéré F, Charruault A-L, Johnson AKC, Guinot G. 2021. New middle Eocene proboscidean from Togo illuminates the early evolution of the elephantiform-like dental pattern. 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 07, issue 04 (2021)

PDF
3D model related to the publication: Cranial morphology and phylogenetic relationships of Amynodontidae Scott & Osborn, 1883 (Perissodactyla, Rhinocerotoidea)
Léa Veine-Tonizzo Logo, Jérémy Tissier Logo, Maia Bukhsianidze, Davit Vasilyan Logo and Damien Becker Logo
Published online: 20/03/2023

Keywords: Amynodontidae; Eocene; Oligocene; phylogeny; Rhinocerotoidea

https://doi.org/10.18563/journal.m3.139

  Abstract

    The present 3D Dataset contains the 3D model of a specimen of Metamynodon planifrons (UNISTRA.2015.0.1106) described and figured in: Veine-Tonizzo, L., Tissier, J., Bukhsianidze, M., Vasilyan, D., Becker, D., 2023, Cranial morphology and phylogenetic relationships of Amynodontidae Scott & Osborn, 1883 (Perissodactyla, Rhinocerotoidea). 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 09, issue 01 (2023)

PDF
3D models related to the publication: The endocranial cast of Indohyus (Artiodactyla, Raoellidae): the origin of the cetacean brain
 
Maëva J. Orliac Logo and J. G. M. Thewissen Logo
Published online: 27/04/2021

Keywords: brain; Cetacea; CT scan; endocast; Eocene

https://doi.org/10.18563/journal.m3.137

  Abstract

    The present 3D Dataset contains the 3D models of the endocranial cast of two specimens of Indohyus indirae described in the article entitled “The endocranial cast of Indohyus (Artiodactyla, Raoellidae): the origin of the cetacean brain” (Orliac and Thewissen, 2021). They represent the cast of the main cavity of the braincase as well as associated intraosseous sinuses.
      

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 07, issue 02 (2021)

PDF

Page 4 of 10, showing 20 record(s) out of 195 total