Current issue


2025-09
Volume 11, issue 03
<< prev. next >>
ISSN: 2274-0422

Article Management

You must log in to submit or manage articles.

You do not have an account yet ? Sign up.

Most downloaded articles (last 90 days)


Page 5 of 10, showing 20 record(s) out of 195 total

3D models related to the publication: Early Oligocene chinchilloid caviomorphs from Puerto Rico and the initial rodent colonization of the West Indies
Laurent Marivaux Logo, Jorge Velez-Juarbe Logo and Pierre-Olivier Antoine Logo
Published online: 07/09/2020

Keywords: Caribbean islands; Caviomorpha; Paleobiogeography; Paleogene; Rodentia

https://doi.org/10.18563/journal.m3.127

  Abstract

    This contribution contains the 3D models of the fossil teeth of two chinchilloid caviomorph rodents (Borikenomys praecursor and Chinchilloidea gen. et sp. indet.) discovered from lower Oligocene deposits of Puerto Rico, San Sebastian Formation (locality LACM Loc. 8060). These fossils were described and figured in the following publication: Marivaux et al. (2020), Early Oligocene chinchilloid caviomorphs from Puerto Rico and the initial rodent colonization of the West Indies. Proceedings of the Royal Society B. http://dx.doi.org/10.1098/rspb.2019.2806 

  Specimens

    Borikenomys praecursor LACM 162447 View specimen

    M3#638

    Right lower m3. This isolated tooth was scanned with a resolution of 6 µm using a μ-CT-scanning station EasyTom 150 / Rx Solutions (Montpellier RIO Imaging, ISE-M, Montpellier, France). AVIZO 7.1 (Visualization Sciences Group) software was used for visualization, segmentation, and 3D rendering. The specimen was prepared within a “labelfield” module of AVIZO, using the segmentation threshold selection tool.

    Type: "3D_surfaces"

    doi: 10.18563/m3.sf.638   state:published




    Download 3D surface file

    Borikenomys praecursor LACM 162446 View specimen

    M3#639

    Fragment of lower molar (most of the mesial part). This isolated broken tooth was scanned with a resolution of 6 µm using a μ-CT-scanning station EasyTom 150 / Rx Solutions (Montpellier RIO Imaging, ISE-M, Montpellier, France). AVIZO 7.1 (Visualization Sciences Group) software was used for visualization, segmentation, and 3D rendering. The specimen was prepared within a “labelfield” module of AVIZO, using the segmentation threshold selection tool.

    Type: "3D_surfaces"

    doi: 10.18563/m3.sf.639   state:published




    Download 3D surface file

    indet indet LACM 162448 View specimen

    M3#640

    Fragment of either an upper tooth (mesial laminae) or a lower tooth (distal laminae). The specimen was scanned with a resolution of 6 µm using a μ-CT-scanning station EasyTom 150 / Rx Solutions (Montpellier RIO Imaging, ISE-M, Montpellier, France). AVIZO 7.1 (Visualization Sciences Group) software was used for visualization, segmentation, and 3D rendering. This fragment of tooth was prepared within a “labelfield” module of AVIZO, using the segmentation threshold selection tool.

    Type: "3D_surfaces"

    doi: 10.18563/m3.sf.640   state:published




    Download 3D surface file


 
  M3 article infos

Published in Volume 06, issue 04 (2020)

PDF
3D models related to the publication: Gnathovorax cabreirai: a new early dinosaur and the origin and initial radiation of predatory dinosaurs
Cristian Pacheco, Rodrigo T. Müller Logo, Max C. Langer Logo, Flávio A. Pretto Logo, Leonardo Kerber Logo and Sérgio Dias-da-Silva Logo
Published online: 08/11/2019

Keywords: brain; Dinosauria; endocranial morphology; Herrerasauridae; inner ear.

https://doi.org/10.18563/journal.m3.103

  Abstract

    The present 3D Dataset contains the 3D models of the skull, brain and inner ear endocast analyzed in “Gnathovorax cabreirai: a new early dinosaur and the origin and initial radiation of predatory dinosaurs”. 

  Specimens
 
  M3 article infos

Published in Volume 06, issue 01 (2020)

PDF
3D surface scan of the type specimen of Molassitherium delemontense Becker and Antoine, 2013: use of a 3D model for research and conservation issues
Olivier Maridet Logo, Gaëtan Rauber, Martine Rochat, Renaud Roch, Jérémy Tissier Logo, Jérémy Anquetin Logo and Damien Becker Logo
Published online: 19/02/2019

Keywords: Conservation; Early Oligocene; Rhinocerotidae; Switzerland

https://doi.org/10.18563/journal.m3.82

  Abstract

    This contribution provides for the first time the 3D model of the type specimen of Molassitherium delemontense (Mammalia, Rhinocerotidae) described in the following publication: Becker et al. (2013), Journal of Systematic Palaeontology, Vol. 11, Issue 8, 947–972, https://doi.org/10.1080/14772019.2012.699007. Conservation issues of the specimen and solutions using 3D model and 3D prints are detailed. 

  Specimens
 
  M3 article infos

Published in Volume 05, issue 02 (2019)

PDF
3D models related to the publication: The pharynx of the iconic stem-group chondrichthyan Acanthodes Agassiz, 1833 revisited with micro computed tomography.
Richard Dearden Logo, Anthony Herrel Logo and Alan Pradel Logo
Published online: 25/06/2024

Keywords: acanthodian; branchial skeleton; chondrichthyan; Permian; pharynx

https://doi.org/10.18563/journal.m3.226

  Abstract

    This contribution contains 3D models of the cranial endoskeleton of three specimens of the Permian ‘acanthodian’ stem-group chondrichthyan (cartilaginous fish) Acanthodes confusus, obtained using computed tomography. These datasets were described and analyzed in Dearden et al. (2024) “3D models related to the publication: The pharynx of the iconic stem-group chondrichthyan Acanthodes Agassiz, 1833 revisited with micro computed tomography.” Zoological Journal of the Linnean Society 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 10, issue 02 (2024)

PDF
3D models associated to: Paleoneurology of Artiodactyla, an overview of the evolution of the artiodactyl brain
 
Maëva J. Orliac Logo
Published online: 15/12/2022

Keywords: artiodactyl; brain; cerebrum; endocast; neopallium

https://doi.org/10.18563/journal.m3.180

  Abstract

    The present 3D Dataset contains the 3D models illustrated and described in the chapter “Paleoneurology of Artiodactyla, an overview of the evolution of the artiodactyl brain” (Orliac et al. 2022) published in "Paleoneurology of amniotes: new directions in the study of fossil endocasts", edited by Dozo, Paulina-Carabajal, Macrini and Walsh.
      

  Specimens
 
  M3 article infos

Published in Volume 08, issue 04 (2022)

PDF
3D models related to the publication: The petrosal and bony labyrinth of Diplobune minor, an enigmatic Artiodactyla from the Oligocene of Western Europe
Maëva J. Orliac Logo, Ricardo Araújo Logo and Fabrice Lihoreau Logo
Published online: 26/05/2017

Keywords: Anoplotheriidae; bony labyrinth; Quercy Phosphorites

https://doi.org/10.18563/m3.3.1.e3

  Abstract

    This contribution contains the 3D models described and figured in the publication entitled "The petrosal and bony labyrinth of Diplobune minor, an enigmatic Artiodactyla from the Oligocene of Western Europe" by Orliac, Araújo, and Lihoreau published in Journal of Morphology (Orliac et al. 2017) https://doi.org/10.1002/jmor.20702.
      

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 03, Issue 01 (2017)

PDF
S.I. Data
Holotype specimen of Donrussellia magna, an adapiform primate from the early Eocene (MP7) of Southern France
Anusha Ramdarshan, Marc Godinot Logo, Samuel Bédécarrats Logo and Rodolphe Tabuce Logo
Published online: 18/06/2015

Keywords: Adapiformes; Early Eocene; Holotype; Primates; Southern France

https://doi.org/10.18563/m3.1.2.e2

  Abstract

    This project presents a µCT dataset and an associated 3D surface model of the holotype of Donrussellia magna (UM PAT 17; Primates, Adapiformes). UM PAT17 is the only known specimen for the species and consists of a well-preserved left lower jaw with p4-m3. It documents one of the oldest European primates, eventually dated near the Paleocene Eocene Thermal Maximum. 

  Specimens

    Donrussellia magna UM PAT 17 View specimen

    M3#17

    3D surface file model of UM PAT 17 (type specimen of Donrussellia magna), which is a well preserved left lower jaw with p4-m3. The teeth (and roots) were manually segmented.

    Type: "3D_surfaces"

    doi: 10.18563/m3.sf17   state:published




    Download 3D surface file

    M3#18

    CT Scan Data of Donrussellia magna UM PAT 17. Voxel size (in µm): 36µm (isotropic voxels). Dimensions in x,y,z : 594 pixels, 294 pixels, 1038 pixels. Image type : 8-bit voxels. Image format : raw data format (no header).

    Type: "3D_CT"

    doi: 10.18563/m3.sf18   state:published




    Download CT data


 
  M3 article infos

Published in Vol. 01, Issue 02 (2015)

PDF
3D model related to the publication: The largest freshwater odontocete: a South Asian river dolphin relative from the Proto-Amazonia
Aldo Benites-Palomino Logo, Gabriel Aguirre-Fernández Logo, Patrice Baby, Diana Ochoa Logo, Ali Altamirano-Sierra Logo, John J. Flynn Logo, Marcelo R. Sánchez-Villagra Logo, Julia Tejeda Logo, Christian de Muizon Logo and Rodolfo Salas-Gismondi Logo
Published online: 21/03/2024

Keywords: Miocene; Odontoceti; Platanistidae; River dolphin

https://doi.org/10.18563/journal.m3.221

  Abstract

    The present 3D Dataset contains the 3D model analyzed in The largest freshwater odontocete: a South Asian river dolphin relative from the Proto-Amazonia. 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 10, issue 01 (2024)

PDF
3D models related to the publication: The neuroanatomy and pneumaticity of Hamadasuchus from the Cretaceous of Morocco and its significance for the paleoecology of Peirosauridae and other altirostral crocodylomorphs
Yohan Pochat-Cottilloux Logo, Nicolas Rinder, Gwendal Perrichon Logo, Jérôme Adrien Logo, Romain Amiot Logo, Stéphane Hua and Jeremy E. Martin Logo
Published online: 14/06/2023

Keywords: Crocodylomorpha; Hamadasuchus; Kem Kem; paleoneuroanatomy; Peirosauridae

https://doi.org/10.18563/journal.m3.183

  Abstract

    The present 3D Dataset contains the 3D models analyzed in Pochat-Cottilloux Y., Rinder N., Perrichon G., Adrien J., Amiot R., Hua S. & Martin J. E. (2023). The neuroanatomy and pneumaticity of Hamadasuchus from the Cretaceous of Morocco and its significance for the paleoecology of Peirosauridae and other altirostral crocodylomorphs. Journal of Anatomy, https://doi.org/10.1111/joa.13887 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 09, issue 02 (2023)

PDF
3D models related to the publication: Fossils from the Montceau-les-Mines Lagerstätte (305 Ma) shed light on the anatomy, ecology and phylogeny of Carboniferous millipedes.
Mickael Lheritier Logo, Jean Vannier Logo, Gilles Escarguel Logo and Vincent Perrier Logo
Published online: 21/02/2023

Keywords: Carboniferous; Juliformia; Montceau; Oniscomorpha

https://doi.org/10.18563/journal.m3.179

  Abstract

    The present 3D Dataset contains the 3D models analyzed in the publication Fossils from the Montceau-les-Mines Lagerstätte (305 Ma) shed light on the anatomy, ecology and phylogeny of Carboniferous millipedes. Authors: Lheritier Mickael, Perroux Maëva, Vannier Jean, Escarguel Gilles, Wesener Thomas, Moritz Leif, Chabard Dominique, Adrien Jerome and Perrier Vincent. Journal of Systematics Palaeontology. https://doi.org/10.1080/14772019.2023.2169891 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 09, issue 01 (2023)

PDF
3D models related to the publication: The late middle Miocene Mae Moh Basin of northern Thailand: the richest Neogene assemblage of Carnivora from Southeast Asia and a paleobiogeographic analysis of Miocene Asian carnivorans
Camille Grohé Logo, Louis de Bonis Logo, Yaowalak Chaimanee, Jérôme Surault Logo and Jean-Jacques Jaeger Logo
Published online: 03/06/2020

Keywords: Carnivora; Mustelidae; otters; skull; upper teeth

https://doi.org/10.18563/journal.m3.109

  Abstract

    The present 3D Dataset contains the 3D models described and figured in the following publication: Grohé C., Bonis L. de, Chaimanee Y., Chavasseau O., Rugbumrung M., Yamee C., Suraprasit K., Gibert C., Surault J., Blondel C., Jaeger J.-J. 2020. The late middle Miocene Mae Moh Basin of northern Thailand: the richest Neogene assemblage of Carnivora from Southeast Asia and a paleobiogeographic analysis of Miocene Asian carnivorans. American Museum Novitates. http://digitallibrary.amnh.org/handle/2246/7223 

  Specimens

    Siamogale bounosa MM-54 View specimen

    M3#505

    3D model of the skull of Siamogale bounosa The zip file contains: - the 3D surface in PLY - the orientation files in .pos and .ori - the project in .ntw

    Type: "3D_surfaces"

    doi: 10.18563/m3.sf.505   state:published




    Download 3D surface file

    Vishnuonyx maemohensis MM-78 View specimen

    M3#506

    3D model of the skull of Vishnuonyx maemohensis The zip file contains: - the 3D surface in PLY - the orientation files in .pos and .ori - the project in .ntw

    Type: "3D_surfaces"

    doi: 10.18563/m3.sf.506   state:published




    Download 3D surface file

    M3#507

    3D model of the reconstructed upper teeth of Vishnuonyx maemohensis The zip file contains: - the 3D surface in PLY - the orientation files in .pos and .ori - the project in .ntw

    Type: "3D_surfaces"

    doi: 10.18563/m3.sf.507   state:published




    Download 3D surface file


 
  M3 article infos

Published in Volume 06, issue 03 (2020)

PDF
3D models related to the publication: Prenatal growth stages show the development of the ruminant bony labyrinth and petrosal bone.
Loïc Costeur Logo and Bastien Mennecart Logo
Published online: 19/10/2016

Keywords: bony labyrinth; foetus; ossification timing; phylogeny; Ruminantia

https://doi.org/10.18563/m3.2.2.e3

  Abstract

    The present 3D Dataset contains the 3D models analyzed in Costeur L., Mennecart B., Müller B., Schulz G., 2016. Prenatal growth stages show the development of the ruminant bony labyrinth and petrosal bone. Journal of Anatomy. https://doi.org/10.1111/joa.12549 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 02, Issue 02 (2017)

PDF
3D models related to the publication: Anatomical correlates and nomenclature of the chiropteran endocranial cast
Jacob Maugoust Logo and Maëva J. Orliac Logo
Published online: 06/04/2023

Keywords: angiology; bats; brain; endocast; neuroanatomy

https://doi.org/10.18563/journal.m3.193

  Abstract

    The present 3D Dataset contains the 3D models of extant Chiropteran endocranial casts, documenting 16 of the 19 extant bat families. They are used by Maugoust & Orliac (2023) to assess the correspondences between the brain and brain-surrounding tissues (i.e., neural tissues, blood vessels, meninges) and their imprint on the braincase, allowing for eventually proposing a Chiroptera-scale nomenclature of the endocast. 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 09, issue 02 (2023)

PDF
3D model of Palaeolama sp. related to the publication: Endocranial casts of Camelops hesternus and Palaeolama sp., new insights into the recent history of the camelid brain.
 
Ana Balcarcel Logo, Dylan Bastiaans and Maëva J. Orliac Logo
Published online: 25/09/2023

Keywords: Artiodactyla; Camelidae; natural endocast; neocortex

https://doi.org/10.18563/journal.m3.190

  Abstract

    The present 3D Dataset contains the 3D model of the endocranial cast of Palaeolama sp. from the mid-Pleistocene (~1.2 Mya) of South America, analyzed in Balcarcel et al. 2023.
      

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 09, issue 03 (2023)

PDF
3D models related to the publication: Redescription, taxonomic revaluation, and phylogenetic affinities of Proterochampsa nodosa (Archosauriformes: Proterochampsidae), early Late Triassic of Candelaria Sequence (Santa Maria Supersequence)
Daniel de Simão-Oliveira Logo, Felipe Lima Pinheiro Logo, Marco Brandalise de Andrade Logo and Flávio A. Pretto Logo
Published online: 04/07/2022

Keywords: Archosauriformes; Late Triassic; osteology; Proterochampsia; taxonomy

https://doi.org/10.18563/journal.m3.170

  Abstract

    The present 3D dataset contains the 3D models of the holotype of Proterochampsa nodosa that were built and analysed in “Redescription, taxonomic revaluation, and phylogenetic affinities of Proterochampsa nodosa (Archosauriformes: Proterochampsidae), early Late Triassic of Candelaria Sequence (Santa Maria Supersequence)”. 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 08, issue 03 (2022)

PDF
3D models related to the publication: Reassessment of the enigmatic ruminant Miocene genus Amphimoschus Bourgeois, 1873 (Mammalia, Artiodactyla, Pecora).
Bastien Mennecart Logo, Grégoire Métais Logo, Jérémy Tissier Logo, Loïc Costeur Logo and Gertrud Rössner Logo
Published online: 01/02/2021

Keywords: bony labyrinth; Miocene; Petrosal bone; ruminant; skull

https://doi.org/10.18563/journal.m3.131

  Abstract

    The present 3D Dataset contains the 3D models analyzed in Mennecart B., Métais G., Costeur L., Ginsburg L, and Rössner G. 2021, Reassessment of the enigmatic ruminant Miocene genus Amphimoschus Bourgeois, 1873 (Mammalia, Artiodactyla, Pecora). PlosOne. https://doi.org/10.1371/journal.pone.0244661 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 07, issue 01 (2021)

PDF
3D models related to the publication: An unpredicted ancient colonization of the West Indies by North American rodents: dental evidence of a geomorph from the early Oligocene of Puerto Rico
Laurent Marivaux Logo, Jorge Velez-Juarbe Logo and Pierre-Olivier Antoine Logo
Published online: 16/07/2021

Keywords: Caribbean islands; Geomorpha; Paleobiogeography; Paleogene; Rodentia

https://doi.org/10.18563/journal.m3.128

  Abstract

    This contribution provides the raw files for the μCT-scan data and renderings of the three-dimensional digital models of two fossil teeth of a geomyin geomorph rodent (Caribeomys merzeraudi), discovered from lower Oligocene deposits of Puerto Rico, San Sebastian Formation (locality LACM Loc. 8060). These fossils were described, figured and discussed in the following publication: Marivaux et al. (2021), An unpredicted ancient colonization of the West Indies by North American rodents: dental evidence of a geomorph from the early Oligocene of Puerto Rico. Papers in Palaeontology. https://doi.org/10.1002/spp2.1388 

  Specimens

    Caribeomys merzeraudi LACM 162478 View specimen

    M3#712

    Right lower dp4: isolated deciduous premolar. The specimen was scanned with a resolution of 5 µm using a μ-CT-scanning station EasyTom 150 / Rx Solutions (Montpellier RIO Imaging, ISE-M, Montpellier, France). AVIZO 7.1 (Visualization Sciences Group) software was used for visualization, segmentation, and 3D rendering. This isolated tooth was prepared within a “labelfield” module of AVIZO, using the segmentation threshold selection tool.

    Type: "3D_surfaces"

    doi: 10.18563/m3.sf.712   state:published




    Download 3D surface file

    M3#714

    5µm µCT data set . Right lower dp4: isolated deciduous premolar. The specimen was scanned with a resolution of 5 µm using a μ-CT-scanning station EasyTom 150 / Rx Solutions (Montpellier RIO Imaging, ISE-M, Montpellier, France).

    Type: "3D_CT"

    doi: 10.18563/m3.sf.714   state:published




    Download CT data

    Caribeomys merzeraudi LACM 162449 View specimen

    M3#713

    Right lower molar (m1 or m2). The specimen was scanned with a resolution of 4.5 µm using a μ-CT-scanning station EasyTom 150 / Rx Solutions (Montpellier RIO Imaging, ISE-M, Montpellier, France). AVIZO 7.1 (Visualization Sciences Group) software was used for visualization, segmentation, and 3D rendering. This isolated tooth was prepared within a “labelfield” module of AVIZO, using the segmentation threshold selection tool.

    Type: "3D_surfaces"

    doi: 10.18563/m3.sf.713   state:published




    Download 3D surface file

    M3#715

    µCT data at 4.5µm

    Type: "3D_CT"

    doi: 10.18563/m3.sf.715   state:published




    Download CT data


 
  See original publication
  M3 article infos

Published in Volume 07, issue 03 (2021)

PDF
3D models related to the publication: Patterns of bilateral asymmetry and allometry in Late Devonian Polygnathus conodonts
Catherine Girard, Anne-Lise Charruault Logo, Ronan Ledevin Logo and Sabrina Renaud Logo
Published online: 03/03/2021

Keywords: Conodonts; Late Devonian; Polygnathus communis; Polygnathus glaber

https://doi.org/10.18563/journal.m3.126

  Abstract

    This contribution contains the 3D models of the set of Famennian conodont elements belonging to the species Polygnathus glaber and Polygnathus communis analyzed in the following publication: Renaud et al. 2021: Patterns of bilateral asymmetry and allometry in Late Devonian Polygnathus. Palaeontology. https://doi.org/10.1111/pala.12513 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 07, issue 02 (2021)

PDF
3D models related to the publication: Siphonodella leiosa (Conodonta), a new unornamented species from the Tournaisian (lower Carboniferous) of Puech de la Suque (Montagne Noire, France).
Louise Souquet Logo, Carlo Corradini Logo and Catherine Girard
Published online: 21/07/2020

Keywords: Carboniferous; Conodonts; Holotype; Montagne Noire; Siphonodella

https://doi.org/10.18563/journal.m3.115

  Abstract

    The present 3D Dataset contains the 3D models of the holotype and the paratypes of the new species Siphonodella leiosa described and analyzed in the following publication: L. Souquet, C. Corradini, C. Girard: Siphonodella leiosa (Conodonta), a new unornamented species from the Tournaisian (lower Carboniferous) of Puech de la Suque (Montagne Noire, France). Geobios, https://doi.org/10.1016/j.geobios.2020.06.004

  Specimens
 
  M3 article infos

Published in Volume 06, issue 03 (2020)

PDF
MicroCT survey of larval skeletal mineralization in the Cuban gar Atractosteus tristoechus (Actinopterygii; Lepisosteiformes)
Raphaël Scherrer Logo, Andrés Hurtado, Erik Garcia Machado Logo and Mélanie Debiais-Thibaud Logo
Published online: 17/05/2017

Keywords: Actinopterygii; development; Lepisosteiformes; mineralization; skeleton

https://doi.org/10.18563/m3.3.3.e3

  Abstract

    Using X-ray microtomography, we describe the ossification events during the larval development of a non-teleost actinopterygian species: the Cuban gar Atractosteus tristoechus from the order Lepisosteiformes. We provide a detailed developmental series for each anatomical structure, covering a large sequence of mineralization events going from an early stage (13 days post-hatching, 21mm total length) to an almost fully ossified larval stage (118dph or 87mm in standard length). With this work, we expect to bring new developmental data to be used in further comparative studies with other lineages of bony vertebrates. We also hope that the on-line publication of these twelve successive 3D reconstructions, fully labelled and flagged, will be an educational tool for all students in comparative anatomy. 

  Specimens
 
  M3 article infos

Published in Volume 03, Issue 03 (2017)

PDF

Page 5 of 10, showing 20 record(s) out of 195 total